How to Use 4 inch circular saw

How big a circular saw should you need to cut 4x4?

In comparison to the 7 ¼” blade, the 10 ¼” has a maximum depth of 3 13/16” while the 12” blade can cut to 4”. This shows that the 10 ¼” blade will still not be sufficient for your needs while the 12” will only just barely make it. There are problems with fitting a larger blade to a normal saw as it has not been designed for such.

What's the best thing about using a circular saw?

One of the good things about using a circular saw is that you can angle the blade to make bevel cuts. However, one issue is that the blade guard can catch on the wood as you start your cut. To prevent this from happening, hold the blade guard up until you get an inch or two into the cut.

What are the operating procedures of a portable circular saw?

C. Portable Circular Saw Operating Procedures 1. Select the correct blade for the type of cut being made and the type of material being cut. 2. Adjust the saw base so the blade extends through the material being cut by no more than 1/4" 3. Mark material so that a good visible line is present to help guide the cut. 4.

What should the depth of a circular saw be?

If you’re sawing a piece of lumber that’s 1 in (2.5 cm) thick, for example, you’d set your blade to a depth of 1.125–1.25 in (2.86–3.18 cm). Setting the saw blade to the correct depth will ensure cleaner cuts and reduce friction, which can wear down the teeth and leave imperfections in the surface of your material.

Share

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *