How to Use big circular saw

What's the best thing about using a circular saw?

One of the good things about using a circular saw is that you can angle the blade to make bevel cuts. However, one issue is that the blade guard can catch on the wood as you start your cut. To prevent this from happening, hold the blade guard up until you get an inch or two into the cut.

How long does it take to make a circular saw guide?

Two guides took about an hour to make, and that included a coffee break. Zero clearance. The guides will prevent splintering on one side of the cut. Place directly on cut line. With many circular saw guides you have to accommodate the distance from the fence to the blade.

How to make a rip cut with a circular saw?

You just need to follow the correct techniques for making rip cuts with a cordless or corded circular saw. The first tip for making a rip cut is to secure the board by tacking it to your clamping sawhorses. Once you have the board secure and marked, you can then use your finger to guide the saw straight through the cut.

What should the depth of a circular saw be?

If you’re sawing a piece of lumber that’s 1 in (2.5 cm) thick, for example, you’d set your blade to a depth of 1.125–1.25 in (2.86–3.18 cm). Setting the saw blade to the correct depth will ensure cleaner cuts and reduce friction, which can wear down the teeth and leave imperfections in the surface of your material.

Share

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *