What is pro circular saw

What are the operating procedures of a portable circular saw?

C. Portable Circular Saw Operating Procedures 1. Select the correct blade for the type of cut being made and the type of material being cut. 2. Adjust the saw base so the blade extends through the material being cut by no more than 1/4" 3. Mark material so that a good visible line is present to help guide the cut. 4.

What do you need to know about a circular saw?

Whether in a workshop or in a construction site, it is an effective instrument for carrying out various tasks. Circular saws use a round blade that is lined with sharp metal teeth. The blade rotates to cut the wood smoothly. Circular saws also have a handle with a trigger switch, a nut to hold the blade in place, and a guard for safety purposes.

What should the depth of cut be on a circular saw?

When you set depth of cut, you need to make sure that too much blade is not exposed beneath the material you’re cutting. So, make sure that the lowest tooth of the blade does not extend more than 1/8 inch beneath the board you’re cutting. A depth of cut properly set like this ensures a safe and accurate cut. 5. Only use sharp blades

When to use 45 degree angle on circular saw?

It corresponds to the position of the blade when it's set to 90 degrees, and should be used any time you’re making a normal cut. The line labelled "45" on the righthand side of the notch is for making beveled cuts at a precise 45-degree angle. Activate the saw blade by pulling the trigger on the rear handle.

Share

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *