what kind of saw to use to cut wood slices

What kind of Saw do you use to cut wood?

To cut your ​wood slices, ​we strongly recommend you have either a miter saw or band saw. These are the best saw options to use when cutting log slices, as they can make more precise cuts with the uneven nature of a log. They can also cut thicker pieces of wood than other types of saws.

What's the best way to cut wood slices?

So, for example, if you have a 10″ miter saw blade, then you could probably cut wood slices that are around 4″-4.5″ thick. To summarize, a miter saw will work well if you have smaller logs to cut slices out of. We think this is the best option. In essence, bandsaws were made for this type of project, and specifically for this type of cut.

What's the proper way to cut plywood with a circular saw?

SIDE NOTE: The falling piece of wood can take a sliver of wood with it. So for a nicer cut support the board continuously, next tip! The picture above was wrong, the one below is the correct way! If you want a nicer cut or you are cutting a sheet of plywood, support the wood the entire length then make a crosscut against the wood.

What's the best way to use a circular saw?

But if you’re struggling or want to use a circular saw make sure you first set the blade depth. Then use one or a couple of these methods to cut the wood; let the cut fall or crosscut the wood, use a guide, watch the blade, and mark the board. Using these tips will help you feel more comfortable and give you the cut you want.

Share

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *